RIP Routing Protocols and Sub-Commands for Cisco CCNA

Learn RIP for real world Networking

Instructed by Lazaro (Laz) Diaz

  • This course will give students a better understanding of the RIP protocol and why it's used and when & how to use it.

This course will help you understand the RIP protocol and it's sub-commands for certification purposes & real world experience.

Here, I use the GNS3 & VIRL simulator & emulator.

The course itself is very simple to understand and will allow the student to grasp the basic concept of what RIP (Routing Internet Protocol) is all about and how to apply it.

DISCLAIMER:   Please note that the simulators/emulators used in this course are not part of the course. It is the students responsibility to have these to practice with. The Cisco Packet Tracer and/or VIRAL (Virtual Internet Routing Lab) are Cisco proprietary software and can only be obtained through Cisco. It is up to each student to obtain the simulator/emulator of their choice to study along with this course. Students have other options like GNS3, BOSOM or Live Equipment.

  • It is recommended that you use the GNS3 simulator for this course
  • Anyone that wants to understand what RIP is all about and how to use it.
View More...

Section 1 : Introduction to the RIP Routing Course

  • Lecture 1 :
  • Introduction to the RIP Routing Course Preview
  • In this lecture, I will be explaining to you about RIP, but some of the sub-commands you will be needing for certification purposes and real-world applications, as a CCENT or CCNA.

Section 2 : Learning our Topology

  • Lecture 1 :
  • Breaking down the topology
  • In this lecture, I will be explaining to you the topology we will be using for the Entire course.
  • Lecture 2 :
  • Summary of Section
  • In this lecture, I will briefly go over topics covered.

Section 3 : The RIP Routing Protocols

  • Lecture 1 :
  • The Basics of RIP
  • In this lecture, I will be explaining internetworking of RIP to include the Different Versions.
  • Lecture 2 :
  • Sub Commands within RIP
  • In this lecture, will be explaining to you the different sub-commands that RIP Has to offer but focusing on specific commands for your certification exam.These commands are also used in real world environment.
  • Lecture 3 :
  • Summary of Section
  • In this lecture, I will briefly go over topics covered.

Section 4 : RIP Routing Versions

  • Lecture 1 :
  • RIP Version 1
  • In this lecture, I will briefly go over RIPv1 and why we do not use it anymore.
  • Lecture 2 :
  • RIP Version 2
  • In this lecture, I will explain how to configure RIPv2 and its benefits.
  • Lecture 3 :
  • RIPng
  • In this lecture, I will briefly define RIPng, and it's configurations.
  • Lecture 4 :
  • Summary of Section
  • In this lecture, I will briefly go over topics covered.

Section 5 : Network and No Auto-Summary Commands

  • Lecture 1 :
  • The Network Sub-Command
  • In this lecture, I will explain what the “network” commands’ purpose and how exactly you need to configure it for the CCENT or CCNA.
  • Lecture 2 :
  • The No Auto-Summary Command
  • In this lecture, I will explain what the “No Auto-summary” command does and the importance of typing the command.
  • Lecture 3 :
  • Summary of Section
  • In this lecture, I will briefly go over topics covered.

Section 6 : Distance and Timers Command

  • Lecture 1 :
  • The "Distance" Sub-Command
  • In this lecture, I will define the “Distance” Sub-command and why you may want to use it.
  • Lecture 2 :
  • The "Timers" Command
  • In this lecture, I will explain the importance of the Timers command and when you would you would need to use it.
  • Lecture 3 :
  • Summary of Section
  • In this lecture, I will briefly go over topics covered.

Section 7 : The passive Interface and Max-Path Sub-Command

  • Lecture 1 :
  • The "Passive Interface" Command
  • In this lecture, I will explain the importance of using the Passive Interface command and its configurations.
  • Lecture 2 :
  • Using the "Maximum Paths"
  • In this lecture, I will explain the purpose and configuration of the Max Path command.
  • Lecture 3 :
  • Summary of Section
  • In this lecture, I will briefly go over topics covered.

Section 8 : Default-Information Sub-Command

  • Lecture 1 :
  • How to use the "Default-Information" Sub-Command
  • In this lecture, I will explain why you would use this command and how to configure it.
  • Lecture 2 :
  • Summary of Section
  • In this lecture, I will briefly go over topics covered.

Section 9 : Summary of Course

  • Lecture 1 :
  • Summary of Course
  • In this lecture, I will briefly summarize the topics Discussed.

Lazaro (Laz) Diaz,

If you are tired of the same old methods of learning and want someone that is pretty much unconventional, but at the same time will provide you with an enjoyable learning experience in layman's terms...then please preview my courses and you will discover that I am your guy. I am a Network Engineer with many years in the field and in the teaching industry. I hold the following certifications: CCNA, CCNA Security, CCNA Voice, CCNP, Security+, Network+, A+, MCP, MCTS & MOS. My teaching experience stems from teaching at various institutions in the US. Now, I bring the classroom to you! I've taught over 100K students worldwide...courtesy of the internet. Thank goodness for technology! ;-) Having been in all sides of the spectrum; as a student, a teacher/trainer, and in the field, I believe this uniquely qualifies me to understand you, the student. I know first hand what you have been exposed to as opposed to what you really want to accomplish. These two are sometimes extremely conflicting and frustrating. That is why I teach in the manner I do and can relate to your rejection of the Status Quo. I have taught corporate employees at MetroPCS (now T-Mobile) and have also taught IT professionals of companies like The Florida Marlins, Ulysse Nardin, Alberta Water Department (Canada), The Assurant Group, Hospital personnel & Attorney's firms, among others. to guide them in acquiring their IT certifications or general knowledge. However, my expertice also extends to being able to teach applications as well. YES!...I am also an applications instructor and qualified to teach Word, Excel, PowerPoint and Access.This, of course, includes the MOS (Microsoft Office Specialist) certification. As you can see, I am a multifaceted person and consider myself to be an eternal student as well. I teach in an unconventional way that allows for students to understand the subject matter and can therefore, not only prepare them for a Cisco, Microsoft or CompTIA certification exam, but apply my methods in the real world. I strive to give the student a greater opportunity to compete in the current job markets. Do I go above and beyond what is needed for a certification?...YES, I do!...because it's not only about getting a certification, it's also about making sure that you, the student, is prepared for a job interview and/or maintaining your current job by enhancing your skills. This is where I step in and make sure that you are prepared for whatever you need and make you an asset to your employer. Everyone has different requirements and I make sure, or at least I try, to provide information for most scenarios. My classes and/or courses are very simple and that's how I like to teach. I truly believe in "KISS",,,NO, I don't want to kiss you, what this means "keep it simple stupid" - If things are kept simple, easily explained in a way that the student can grasp quickly and retain the information...then I have achieved my goal! For those that do not know me yet, you may not be used to my style of teaching, but you will soon get accustomed to it :)... I'm very laid back, I try to make learning fun and I teach in layman's terms...no physics jargon or mumbo jumbo in my teachings. My courses are very interactive and extremely dynamic!...you will not find my lectures monotone or boring, because falling asleep, for lack of excitement, is just NOT an option. Just take a look for yourself at my video previews, which I always provide on ALL my courses, so you can determine if I'm the right guy to help you get your industry specific certifications. ;) I certainly hope that after a careful review of my credentials & testimonials (you can Google it you know!), I'm the Cisco, Microsoft or CompTIA Instructor you're looking for! Laz Network Engineer, Cisco, Microsoft, CompTIA Instructor & Motivational Evangelist - and - Author of: "The Only IP Book You Will Ever Need!" now available on AMAZON
View More...

Ethical Hacking and Penetration Tes...

By : Darshil Modi

Lecture 21

$21

Implementing & Configuring Cisco Ro...

By : Dariusz Lipski

Lecture 10

$20

Learn NxtGen Hacking with Technolog...

By : Gopikrishna C

Lecture 80

$14

Google TensorFlow Hands on with Pyt...

By : UNP United Network of Professionals

Lecture 51

$21

CISSP- Certification Introduction

By : MUKESH SINGH

Lecture 18

$14

Complete Ethical Hacking & Penetrat...

By : Abhilash Nelson

Lecture 29

$14

Need any help with the platform? Contact us at: support@learnfly.com